Dedusting ash ball press

Capacity：2～70 t/h......

Introduction：Dedusting ash ball press is a kind of equipment for pressing powdery materials into balls. The following materials can be pelletized, granulated or pressed, suc.....

Product Description

Dedusting ash ball press is a kind of equipment for pressing powdery materials into balls. The following materials can be pelletized, granulated or pressed, such as dust removal ash, aluminum chips, activated carbon, alumina, bauxite, caustic sodium, charcoal, clay, coke chips, coal, cryolite, chemical fertilizer, plastic, limestone, pigment, urea, potassium salt, etc. Especially for the fly ash collected from most particulate waste gas, iron and steel enterprises will produce a large amount of dust, iron oxide scale and so on, which has good utilization value.

Product Advantage

1. Economic benefits:

The dedusting ash ball pressing machine produced by our company can press a variety of materials, especially for the collected fly ash of some waste gas and particles, as well as the dust and waste produced in industrial production. It not only realizes waste utilization, but also is conducive to environmental protection.

2. Configuration upgrade:

By constantly upgrading the technology and process of dust removal ash ball press. The product design of dedusting ash ball pressing machine is more humanized, easier to use and use.

3. Energy saving and environmental protection:

After being pressed by the dedusting ash ball press, the dust is reduced, the unit weight is controlled, the return is used, the transportation characteristics are improved, and the enterprise cost is saved. It has brought good economic and social benefits.

Product Parameter

Model	Time production (t/h)	Roll width (mm)	Roll diameter (mm)	Power (kw)	Spindle speed (r/min)
WL-360	2-4	250	360	7.5	18
WL-400	4-8	280	400	11-15	15
WL-500	8-11	300	500	18.5-22	13
WL-650	11-18	336	650	20-30	13
WL-750	18-25	400	750	45	13
WL-850	25-35	500	850	75	10
WL-1250	35-70	650	1250	130	10

Working Principle

Structural principle

The dedusting ash ball pressing machine adopts preloading screw and strong pressure counter roll type. The main shaft is forged by 40Cr, the roller skin is made of wear-resistant alloy, hydraulic jacking, compact structure and durable.

The dedusting ash ball press transmits the power to the two pressure rollers at the same time through the reducer, and makes the two pressure rollers rotate opposite to each other. During the rotation of the two pressure rollers, the material enters the ball mold on the pressure roller. With the rotation of the pressure roller, the pressure borne by the material decreases and increases. When the material rotates to the line contact point of the two rollers, the pressure borne by the material has reached the peak value. Under the action of huge linear pressure, the material changes from powder to finished ball.

Finished ball

The dedusting ash ball pressing machine produced by our company can produce finished balls with special shapes such as square, ball egg, random circle, goose egg and pillow. The shape and size can be defined according to the specific production requirements of users. See the following figure for the finished product sample of dust removal ash ball press: